Federal Steel offers a full range of low temperature pipe for a wide range of industries and enviornments.
ASTM A333 Low Temperature Pipe Specifications
ASTM A333 (ASME S/A-333) Pipe grades permit low temperature service. This specification covers nominal (average) walled pipe almost exclusively in seamless. Several grades of ferritic steel are included.
Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse effect on low-temperature impact properties. A333 pipe is furnished to Grades 3 and 1/6.
For Additional Grades, please call +1 (800) 325-1584
Specifications
Size Range
½” nominal - 36” OD
Wall Thickness
STD up to 4"
and Thicker Upon Request.
Grades
1 & 6
ASTM A333 Mechanical Properties
Properties | Grade 1 | Grade 6 | |
---|---|---|---|
Tensile Strength, min., psi, (MPa) | 55,000 (380) | 60,000 (415) | |
Yield Strength, min., psi, (MPa) | 30,000 (205) | 35,000 (240) |
CVN Impact (Charpy) Test
Grades | Minimum Impact | Test Temperature | |
---|---|---|---|
Grade 1 | -50 (F) | -45 (C) | |
Grade 6 | -50 (F) | -45 (C) |
Note on Heat Treatment: Grades 1 and 6 shall be heat treated to control their microstructure.
ASTM A333 Chemical Properties
Grade | C, max. | Mn | P, max. | S, max. | Si, min. | Cr, max. | Cu, max. | Mo | Ni | Cb, max. | V |
---|---|---|---|---|---|---|---|---|---|---|---|
Grade 1 | 0.30 | 0.40 - 1.06 | 0.025 | 0.025 | - | - | - | - | - | - | - |
Note: This is similar chemistry to A53/SA53 | |||||||||||
Grade 6 | 0.30 | 0.29 - 1.06 | 0.025 | 0.025 | 0.10 | 0.30 | 0.40 | 0.12 | 0.40 | 0.12 | 0.08 |
Note: This is similar chemistry to A106/SA106 |
Note: This is summarized information from ASME Specification A333. Please refer to the specific Standard or Specification or contact us for more details.